Component Video (Better) - Toshiba 65L350U Instruction Manual

Component video (better)

Note
Cables are often color-coded to match color-coded jacks.
On your TV
Component Audio cable
video cable connectors
connectors
Component Analog
video jacks audio jacks
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to the Y/VIDEO, P
component video out jacks on the cable or satellite box.
4 Connect an audio cable (not provided) to the AUDIO L and R jacks on the back of your TV and to the audio out jacks
on the cable or satellite TV box.
Important
5 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the Input Selection list.
7 Press or to highlight COMPONENT, then press ENTER.
16
Cable or
satellite box
Component
video cable
Cable
wall jack
• The Y/VIDEO, P , and P
B
device) share the AUDIO L and R jacks with the Y/VIDEO jack (used to
connect an AV device). You can only connect one component video or
AV device at a time. We suggest upgrading to HDMI if your cable or
satellite box supports it.
• When you connect the audio using the AUDIO L and R jacks, the audio
output is analog.
Audio cable
video jacks (used to connect a component
R
www.tv.toshiba.com
Toshiba 65" 1080p 120Hz LED TV
Back of TV
, and P jacks on the back of your TV and the
B R