Connecting A Dvd Player Or Satdlite Receiver And A Vcr - Toshiba COLORSTREAM 32HFX71 Owner's Manual

Connecting a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, and TV
programs, and record one TV channel while watching another
channel.
You will need:
• one coaxial cable
• two pairs of audio cables (one single and one pair of audio cables
for a mono VCR)
• one video cable (between the TV and VCR)
• one S-video cable (between the TV and DVD player/satellite
receiver)
From Antenna
Stereo VCR
Note:
For the highest possiblepicture quality from a
non-Co/orStream DVD player/satellite
receiver,you must use an S-video came
between the T1/ a nd DVD player/satellite
receive_ (/f your DVD player or sate//ite
receiver is Co/orStream-compatib/e,see page
8).
Do not connect both an S-video came and a
regular video cable between the 71/and DVD
player/satellite receiverat the same time.
Doing so will distort the picture.
Do not connect the DVD player/satellite
receiver and VCR to the same video channel
on the T_ (See the illustrations,which show
the DVD player/satellite receiver connected to
Video-1 on the TVand the VCR connected to
Video-2on the T_)
From Satellite Dish
TV
Caution:
Theunauthorized recording of television
programs, videotapes,and other materials
may infringe upon the provisions of copyright
laws.
DVD/Satellite receiver
7