Licensing - NEC UNIVERGE SV8100 Service Information Bulletin

Licensing

Licensing Server:
This secure, web based tool has many benefits over the previous licensing mechanisms. These include:‐
Fast turnaround time in receiving licenses,
–
Greater control of distribution of these licenses,
–
Tools for you to manage your customer data,
–
Easy re‐issue of lost or misplaced codes.
–
The system requires an email address. (A new email address specific to this purpose will assist in easier
licensing administration for you.)
The system relies on 3 main items.
An email address for licensing purposes,
–
A Hardware Key Code also known as HKC or Key (found on a CPU),
–
A customer and location of where the system will reside.
–
Hardware Key Code:
HKC or Key also known as Hardware Key Code, can be found in the following places for the SV8100:
On the side of a CD‐CP00 packing box,
–
On the CD‐CP00 PCB,
–
Or by dialling Feature 3 on a handset and reading from the display.
–
Accessing the Licensing Server:
You can access the Licensing Server via the following Link:
http://www.nec.com.au/lic or by clicking on the link in any email from the License Server.
–
Where you do not have access to the Licensing Server, please contact your account manager.
–
Please note: You will need your NEC Customer Number for this registration. There will be only
–
one login account created per Dealer location.
License Logins:
The local Licensing Administrator gets complete access to the functionality available for that
dealership. This is done via a portal similar to the one in the below diagram.
Each dealer will be required to communicate any required changes to their login (such as a new
password) through their account manager.
Technicians will not be given individual logins to the License Server at this time. Order entry staff will
be providing their licenses to their own technical staff.
Document No. SIB 244
NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.
The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products
described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.
This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC
Australia Pty Ltd.
13 52
Page of
st
1 July 2008