Viewing The Last Call Log; Acknowledgement Options - Menvier Security SD1 + Operator's Manual

Viewing The Last Call Log

When a call is successfully acknowledged, the SD1+ stores the
event in a "Last Call Log".
The log may then be viewed as follows:
1. Ensure that the SD1+ is initialised and the display is showing
"READY" (see page 4).
2. Press
and the display will show "VIEWLOG-".
9
3. Press
and the display will show the Last Call Log i.e. "BLANK " if
[
the log is empty, or "A)--3-" (Alarm on trigger input A
acknowledged by recipient 3). If the display shows "A)----"
then none of the calls were acknowledged.
4. Press
to accept the option displayed and return to "READY".
[

Acknowledgement Options

Once the SD1+ has made its call and delivered its message, it
requires a signal to say that the message has been successfully
received. This is done by the recipient pressing the number "8"
b u tto n o n th e ir te le p h o n e . W h e n th e S D 1 + h a s b e e n
acknowledged, it will shut down until it is triggered again. This option
determines how many times the unit must be acknowledged
before it shuts down. These options include: Any 1 person (ANY-1),
Any 2 people (ANY-2), Any 3 people (ANY-3), All 4 people (ALL-4)
or nobody at all (NO-ONE).
1. Ensure that the SD1+ is initialised and the display is showing
"READY" (see page 4).
2. Press
and the display will show "CLEARBY-".
0
3. Press
and the display will show the acknowledgement option
[
that is currently programmed i.e. "ANY-1 ".
If required, the other 4 acknowledgement options
"ANY-2", "ANY-3", "ALL-4" and "NO-ONE", can be
scrolled through by pressing the
4. Press
to accept the option displayed and return to "READY".
[
B
key.
SD1+
1 READY
SD1+
READY
SD1+
2
VIEWLOG-
SD1+
3
No Events Logged
BLANK
SD1+
Last Message Sent (A to Tel 3)
A) --3-
SD1+
4
READY
SD1+
7
1
SD1+
READY
SD1+
READY
SD1+
2
CLEARBY-
SD1+
3
Needs 1 Acknowledgement
ANY - 1
SD1+
Needs 2 Acknowledgements
ANY - 2
SD1+
Needs 3 Acknowledgements
ANY - 3
SD1+
Needs 4 Acknowledgements
ALL - 4
SD1+
Needs No Acknowledgement
NO-ONE
7
SD1+
4
READY
SD1+
7
7