Deleting Phrases & Telephone Numbers - Menvier Security SD1 + Operator's Manual

Deleting Phrases & Telephone Numbers
If new phrases need to be recorded or new telephone numbers
need to be programmed into the unit, the old ones will have to be
deleted, this option will allow you to perform either of these actions.
1. Ensure that the SD1+ is initialised and the display is showing
"READY" (see page 4).
2. Press
and the display will show "ENT 1-4 OR 0-C".
[
3. Press
and the display will show "ERASE-".
[
4. Press
and the display will show "SPEECH".
B
If required, the other delete option "PHONES", can be
scrolled to by pressing the
5. Press
to accept the option displayed and return to "READY"
[
If required, the telephone numbers can also be deleted
individually when in the telephone number programming,
(pages 8-10).
B
key.
1 SD1+
READY
SD1+
READY
SD1+
2
ENT 1-4
SD1+
OR 0-C
SD1+
3
3
ERASE-
SD1+
4 3
Clear Messages
SPEECH
SD1+
Clear Telephone Numbers
PHONES
SD1+
5
7 READY
SD1+
13