Quinny Speedi Instructions For Use & Warranty page 7

Instructions for use
For use with the Quinny Dreami carrycot (up to 9 kg) and
the Maxi-Cosi car safety seat (up to 13 kg).
Placing / removing the adapters
(14) Remove both guards by pushing in the button (1)
whilst simultaneously pushing the guards upwards
(2).
(15) Slide the adapter marked R into the right-hand side
and the adapter marked L into the left-hand side of
the adapter attachment.
Continue sliding until you hear a "click".
Check to make sure the adapters are secure.
(16) To remove the adapters, push in the spring-loaded
button (1) whilst simultaneously pushing the
adapters upwards (2).
Place both guards back onto adapter attachments.
Placing / removing the Quinny Dreami carrycot and
Maxi-Cosi car safety seat
• Apply the brake on the Quinny Speedi (see Using
the parking brake).
(17/19) Place the carrycot / car safety seat onto the
adapters with the foot end between the sides of
the handle.
Check to make sure the carrycot / car seat is
secured by lifting it up by the handles.
(18/20) To remove, place your thumbs on the control
buttons on both sides of the carrycot / car safety
seat (1). Push in the buttons while lifting the
carrycot / car safety seat from the Quinny Speedi
(2).
When used as a pushchair
Placing / removing the pushchair seat
• Apply the brake on the Quinny Speedi (see Using
the parking brake).
(21) To remove the pushchair seat undo the velcro
under the foot rest (1) and undo the clasp (2) and
the press stud (3).
(22) Open the press studs on the bottom (1) and undo
the velcro near the handlebar safety lock (2).
• Remove the pushchair seat from the frame.
• When placing the pushchair seat back onto the
frame, make sure to re-attach all press studs, clasps
and velcro.
• IMPORTANT: Make sure you remove the adapters
before attaching the pushchair seat (see Placing /
removing the adapters).
• Check to make sure everything is securely fastened
by lifting up the pushchair seat.
Safety harness
• Apply the brake on the Quinny Speedi (see Using
the parking brake).
• Make sure the safety harness is loosened before
placing your child (carefully!) into the seat.
(23) Slide the buckle sections together (1) and fasten
the lap and shoulder belts into the crotch strap by
clicking the buckle sections into the fastener (2).
(24) Adjust the belts to the size of your child by
lengthening or shortening the belts using the
clasps.
11
EN <<