Realignment - Kenwood TK-5210 K Service Manual

1. Modes
User mode
∗
Panel test mode 1
PC mode
Firmware
programming mode
∗
Clone mode 1
Self programming mode
Firmware version information
Clock adjustment mode
Mode
User mode For normal use.
∗
Panel test mode 1 Used by the dealer to check the fundamen-
tal characteristics.
∗
Panel tuning mode 1 Used by the dealer to tune the transceiver.
PC mode Used for communication between the
transceiver and PC (IBM compatible).
Data programming Used to read and write frequency data and
mode other features to and from the transceiver.
PC test mode Used to check the transceiver using the PC.
This feature is included in the FPU.
See panel tuning.
Firmware Used when changing the main program of
programming mode the flash memory.
∗
Clone mode 1 Used to transfer programming data from
one transceiver to another.
Self programming Frequency, signaling and features write to
∗
mode 1 the transceiver.
Firmware version Used to confirm the internal firmware
∗
information 1 version.
Clock adjustment Used by the dealer to adjust date and time.
∗
mode 1
∗
1 : K2 and K3 models only

REALIGNMENT

∗
Panel tuning mode 1
Data programming mode
PC test mode PC tuning mode
∗
1
∗
1
∗
1
Function
2. How to Enter Each Mode
Mode
User mode Power ON
∗
Panel test mode 2 Press and hold the [Side3] and [PTT] keys
while turning the transceiver power on and
then release the [PTT] key first.
PC mode Received commands from PC
Panel tuning Press the [Side3] key, in Panel test mode
∗
mode 2
Firmware Press and hold the [Side3] and [PTT] keys
programming mode while turning the transceiver power on and
then release the [Side3] key first.
∗
Clone mode 2 Press and hold the [Side2] and [PTT] keys
while turning the transceiver power on and
then release the [Side2] key first.
Self programming Press and hold the [Side2] and [PTT] keys
∗
mode 2 while turning the transceiver power on and
then release the [PTT] key first.
Firmware version Press and hold the [Side3] key
∗
information 2 while turning the transceiver power on.
Clock adjustment Press and hold the [Orange] and [PTT] keys
∗
mode 2 while turning the transceiver power on and
then release the [Orange] key first.
∗
2 : K2 and K3 models only
3. Panel Test Mode
Setting method refer to ADJUSTMENT.
4. Panel Tuning Mode
Setting method refer to ADJUSTMENT.
TK-5210
Operation
(K2 and K3 models only)
(K2 and K3 models only)
3