Table of Contents
Advertisement
Naut Air Sec 4_2008.qxd:Naut Air Sec 4.qxd
Engine Cooling Water Intake Valve
Your boat is equipped with a valve (seacock) on the engine cooling
water intake. The handle has a slide mechanism to prevent the
valve from being shut off inadvertently. The valve is used to shut off
the water supply in the event a hose failure or water leakage occurs.
The valve is open when the yellow handle is in-line with the valve
body and the valve is closed when the handle is perpendicular to
the valve body. Leave the valve open at all times unless an
emergency condition requires you to close the valve to stop a leak
or the possibility of a leak.
The valve is located on the starboard side of the transmission.
Controls and Indicators
WATER
VALVE
6/24/08
3:54 PM
Page 45
CORC106
4-45
Advertisement
Table of Contents
