Before First Use; Wash Setting; Standard Washing; Removing Washing (Once Programme Is Finished) - Logik L712WM13 Instruction & Installation Manual

Before First Use

Before washing your clothes for the first time, run a full wash programme first:
1. Connect the machine to the mains power supply and the water supply.
2. Put a small amount of detergent in the detergent drawer. Close the drawer.
3. Select a wash programme.
4. Press the POWER button.
5. Press the START/PAUSE button.

Wash Setting

Standard Washing

1. Pull the door handle and put the laundry in the
drum. (Refer to Preparation to sort your laundry
before it goes into the drum.) Make sure no washing
gets caught in the door.
2. Close the door and turn the Programme Selection
Dial to select your wash programme.
3. Select the temperature if desired.
4. Add detergent into the detergent drawer. The
quantity of detergent will depend on the amount
of laundry, the degree of soiling and the water
hardness. Use the amount of detergent suggested
on the packaging.
5. Press the Power button.
6. Press the Start / Pause button to start the washing.
7. The washing machine will sound when the
programme is complete.
• If the door is locked and you switched the washing machine off and then on - or if
there's a power cut - it will stay locked for 1 minute.
• When you start the washing machine, the Start / Pause indicator will stop flashing
and light up solidly.

Removing Washing (Once programme is finished)

Door remains locked for 1 minute after wash stopped.
• Open the washing machine door and remove your washing.
• Remove any foreign objects to avoid risk of rusting.
• Leave the door and detergent drawer open so that residual water can evaporate.
16
Favorite
Express 15'
Eco