DCR-PC330/PC330E
2-10.HINGE BLIND ASSEMBLY
2 Open the LCD panel.
3 Two screws (M1.7 × 2.5),
lock ace, p2 (silver)
1 Screw
(M1.7 × 2.5)
Caution
When re-assembling, pass the harness (PB-053)
through the groove the hinge blind assembly.
The harness must
be hooked here.
Harness (PB-053)
2-11.LCD UNIT
Caution
When re-assembling,
attach the tape (A) as shown.
Tape (A)
Groove
3 LCD cabinet (R) assembly
2 Two claws
4 Tape (A)
Harness (PB-053)
PD-198
4 Hinge blind assembly
A
7 LCD unit
2-8
1 Two MI screws
(M1.7 × 2.5)
5 Harness
(PB-053) (20P)
A
6 Two screws
(M1.7 × 2.5),
lock ace, p2 (black)