Technical Data; Noise Information - Worx WG151E Manual

TECHNICAL DATA

Voltage
No load speed
Cutting diameter
Line diameter
Charging time
Battery pack
Machine weight

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K & K
pA wA
Wear ear protection when sound pressure is over
8 8
Typical weighted vibration
Uncertainty K
wARNINg! The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
wARNINg! To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where
2-in-1 cordless Li-ion grass trimmer/edger
18V
8500/min
250mm
1.65mm
3-5hr approx.
1.3Ah li-on
2.4kg
77dB(A)
94dB(A)
3.0dB(A)
80dB(A)
4.5m/s²
1.5m/s²
EN