Advertisement
2.COMPONENT LIST
1.
BATTERY PACK *
2.
REAR HANDLE
3.
FRONT HANDLE
4.
SAFETY GUARD
5.
OPERATOR PRESENCE SWITCH
(ALL AROUND SWITCH FUNCTION)
6.
THROTTLE TRIGGER
7.
BATTERY PACK RELEASE BUTTON*
8.
BLADE
9.
BLADE SHEATH
* Not all the accessories illustrated or described are
included in standard delivery.
3.TECHNICAL DATA
Type Designation: WG263E WG263E.X (230-
269- designation of machinery, representative of
cordless hedge trimmer)
8
Power
No load speed
Blade length
Cutting length
Tooth Spacing
Cutting diameter
Machine Weight
(bare tool)
** Voltage measured without workload. Initial bat-
tery voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
*** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
SUGGESTED BATTERIES
AND CHARGERS
Category
20V Battery
WG263E WG263E.X ***
20V
Max** Lithium
3400/min
57cm (22")
54cm (21'')
33mm (1-1/4'')
27mm (1'')
2.5kg (5.5lbs)
Model
Capacity
WA3014
4.0 Ah
Cordless Hedge Trimmer
WG263E WG263E.X
20V Charger
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum)
determined according to EN 62841:
Vibration emission value:
Front handle a
= 1.59 m/s
h
Rear handle a
= 1.56 m/s
h
Uncertainty K = 1.5 m/s²
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may
be used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained.
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed.
WA3880
2.0 A
L
: 83.05dB(A)
pA
K
= 1.56dB(A
pA
L
:94.05 dB(A)
wA
K
= 1.56dB(A)
wA
2
2
)
Advertisement
