Component List; Technical Data - Worx WG286E Safety And Operating Manual

2. COMPONENT LIST

1. ROTATING REAR HANDLE
2. POWER INDICATOR LIGHT
3. BATTERY PACK*
4. FRONT HANDLE
5. OPERATOR PRESENCE SWITCH
(ALL AROUND SWITCH FUNCTION)
6. SAFETY GUARD
7. BLADE
8. BLADE SHEATH
9. LOCKING SWITCH FOR ROTATING
10. THROTTLE TRIGGER
11. HEDGE SWEEPER*
12. BATTERY PACK RELEASE BUTTON*
(See Fig. G)
* Not all the accessories illustrated or described
are included in standard delivery.

3. TECHNICAL DATA

10
Type WG286E WG286E.X (250-299- designation
of machinery, representative of cordless hedge
trimmer)
Voltage
No-load speed
Blade length
Cutting length
Tooth spacing
Max cutting diameter
Machine Weight
(Bare Tool)
** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models
*** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
WG286E WG286E.X**
40V MAX(2x20V MAX.)***
3400 /min
61 cm
58 cm
33 mm
27 mm
2.7 kg
40V Cordless Hedge Trimmer
WG286E WG286E.X
SUGGESTED BATTERIES
AND CHARGERS
Category Type
WA3551
20V Battery
WA3639
WA3772
20V Charger
WA3883
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum)
determined according to EN 62841:
Vibration emission value
Uncertainty K = 1.5m/s²
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may
be used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise
emissions during actual use of the power
tool can differ from the declared value depending
on the ways in which the tool is used especially
what kind of workpiece is processed dependant on
the following examples and other variations on how
the tool is used:
How the tool is used and the materials being cut or
drilled.
Capacity
2.0 Ah
2.0 Ah
2.0 A
4.0 A
L : 85.83 dB(A)
pA
K = 3 dB(A)
pA
L : 96.83 dB(A)
wA
K = 3 dB(A)
wA
Rear: a =1.79 m/s²
h
Front: a =2.73 m/s²
h