Position Setting - EverFocus EPTZ3600 User Manual

clockwise.

360° auto pan: Press Shift + A.Pan to enter the 360° auto pan. System will ask you
to enter 360° auto pan speed (1~239). The camera will turn 360° automatically, but
not tilt.

4.4. Position Setting


Focus on a preset position: Press the number key, and then press Position to
focus on the number of preset position; or you can press Position, then enter the
preset position number, and then press Enter to focus on the number of preset
position.

Preset a position: Shift the Joystick to the position you would like to preset, and
then press Shift + Position. The system will ask you to enter the preset position
number (1~192), and then press Enter to save the position. There are up to 192
positions can be preset.
Three specific preset positions can be set as follows:
92 => Set Left Limit Stop (A position)
93 => Set Right Limit Stop (B position)
95 => Enter Menu mode (Use keyboard control keys to control OSD items; Focus F.
to go downward, Focus N. to go upward. IRIS + go to previous setting and IRIS – to
exit).
You can directly go to the following specific preset positions:
33 => Rotation of 180 degree
34 => Go to Home position (if Home Position is set by EVF Keyboard)
90 => Run tour (one-way)
91 => Run Pattern
75