Setting Up The Playback Function; Inserting / Removing The Micro Sd Card - EverFocus EZN3160 User Manual

6.2 Setting up the Playback Function

Note that the Playback function will not be activated until the user has inserted a micro SD card in the
camera's micro SD card slot. The card may also have to be formatted in the Secure Digital Card field (see
7.1.3 Storage). For the tested card brands, please refer to Appendix.
6.2.1

Inserting / Removing the micro SD Card

1. To insert the micro SD card: Remove the camera cover and insert the micro SD card into the micro
SD card slot before powering on the camera.
2. To remove the micro SD card: Click the Remove button (Advanced tab > System Settings > Storage
> Secure Digital Card) when the camera is powered on, the micro SD card information "micro SD
card is not mounted" will display and the Remove button will change to Attach, and then you may
remove the micro SD card. If you want to insert the micro SD card again, insert the micro SD card
and then click the Attach button.
After inserting the micro SD card into the micro SD card slot, the Playback button on the Live View
page should be activated. If not, click the Refresh button for the camera to detect the micro SD card.
Then, the Playback button should be activated now.
Note: For the first-time user, click the Format button to format the card. All data on the disk will be
deleted if the Format button is clicked.
Micro SD Card Slot
24
EZN3160/3260