Communication Protocol Setting; Transmission Speed Setting (Baud Rate Setting); Bracket And Speed Dome Installation; Installation Requirements - EverFocus EPTZ3600 User Manual

Eptz36x series

Hide thumbs Also See for EPTZ3600:

Table of Contents

2.3.2. Communication Protocol Setting

The 1

, 2

and 3

protocol is EVF.

Notice: If all protocol switches are set to ON, the EPTZ3600/EPTZ3600i will enter a

self-test mode.

The 4

and 5

bits on the PCB board are used to set the Baud Rate. The default baud rate

setting is 9600.

1. Installation should be handled by a qualified service agent and should comply with

all local regulations. Service personnel should expect potential problems such as

surface strength, surface material, falling objects, outer breaches, building vibration

or other similar conditions.

2. Check for all necessary materials, and ensure if the selected installation location is

suitable for the EPTZ3600/EPTZ3600I.

bits are used to set communication protocol. The factory default

Bracket

Table of Contents

Eptz3600i