Setting Up The Playback Function; Inserting / Removing The Sd Card - EverFocus EMN Series User Manual

6.2

Setting Up the Playback Function

Note that the Playback function will not be activated until the user has inserted a micro SD card in the
camera's micro SD card slot. The card may also have to be formatted in the Secure Digital Card field
(see 7.1.3 Storage).

6.2.1 Inserting / Removing the SD Card

1. To insert the SD card: Remove the camera cover and insert the SD card into the SD card slot
before powering on the camera.
2. To remove the SD card: Click the Remove button (System Settings > Storage > Secure Digital Card)
when the camera is powered on, the SD card information "SD card is not mounted" will display
and the Remove button will change to Attach, and then you may remove the SD card. If you want
to insert the SD card again, insert the SD card and then click the Attach button.
After inserting the SD card into the SD card slot, the Playback button on the Live View page should be
activated. If not, do the following:
1. Click the Remove button, pull the card out and re-insert it.
2. Click the Format button to format the card. NOTE: All data on the disk will be deleted if the
Format button is clicked.
Micro SD Card Slot
19
EMN Series Mini Mobile IP Dome