Sabo 102-13G Instruction Manual page 155

MAINTENANCE
6.4.4 R
EPLACING A FUSE
The general and power circuits of the
electrical system are protected by a 7.5 A
delayed fuse (1).
When the fuse blows, the machine stops
and all the lights on the dashboard go out.
IMPORTANT
type and ampere rating, and never with one of another rating.
If you cannot find out why the fuse has blown, consult your Dealer.
6.4.5 R
EPLACING BELTS
Replacing belts is quite a complicated process of dismantling and subsequent
adjustment and must only be carried out by your Dealer.
NOTE
wear! ALWAYS USE GENUINE REPLACEMENT BELTS!
A blown fuse must always be replaced by one of the same
Replace the belts as soon as they show obvious signs of
ENG 47
1
7,5 Amp