Haier XQJ60-31 Service Manual page 11

Conn ectio n betw een the water in let hose and the was hin g machin e
1.Do not take off the water absorption cushion.
Please check if the cushion is dropped or
damaged before each usage. If it happens
please contact our after-sale department
immediately.
2.Put the nut of the water inlet hose on the
valve jointer.
3.Fasten the nut. Swing it gently to confirm if
it's suitable.
Connection between the join ter of the water inlet hos e and the water inlet hos e
1.Push down the slider. Insert the water inlet
hose into the jointer.
2.Hang the lock lever to the jointer. Release
the slider till a click sound is heard.
Check the connection between the jointer of the water inlet hos e and the water faucet
1.Swing the hose gently to confirm if it is fastened
stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Each time before use please check if the
connection between the jointer of the water inlet
hose and the water faucet, and the installation
of the water inlet hose are firm, so as to prevent
dropping from improper installation position.
Dismantle the water inlet hose
1.Close the water faucet.
2.Press the locking lever. Push down the slider .
Then pull off the water inlet hose. If the machine
is used more than once ever y week, the jointer
of the water inlet hose can be kept on the faucet
to prevent damaging the fixing screw.
Key Points in Installa tion, Adjustment and Disassembly
Nut of the water inlet hose
Jointer of the
Water absorption cushion
water inlet valve
Locking lever
Jointer of the
water inlet hose
Slider
Locking lever
Slider