Table of Contents
Advertisement
1. Trouble alarm and solve method
In spinning after washing and
rinsing, the machine stops
running.
The draining does not work,
(The WASH,RINSE and SPIN
indicator flash and alarming
10 seconds)
The safety switch acts. The
spinning can not work
(The WASH,RINSE and SPIN
indicator flash and alarming
10 seconds)
If trouble can not be solved
after alarming, it will alarm
again every a few minutes.
2. T est program (test without water)
Push and hold the "
down the power switch to enter buzzer T est program. Push the "
select wash T est program and spin T est programs.
Test
name
The buz zer ring s once. All of the indicators flash . After 3 se conds, all of the indicators
B uzzer
flash and the buzzer rin gs inter mittebtly 3 times(0.3s c onnected,0.3s s hutoff). The
T est
power is switch ed off automa tically after finis hing.
program
The
WASH
Wash
T est
the
program select
program
The
standard
S pin
spinning without water for 5 minutes. The alarm during that procedure is the same
T est
as the alarm in normal spinning program.
program
The top lid is not closed.
Is the drain hose blocked
by foreign material?
Are the laundries put
slantingly?
Is the machine slanting?
" and "
PROGRAM SELECT
Test content
indicator flashes
the
button
indicator is on
Trouble-shooting
PROCEDURE SELECT
standard
indicator is on. Run washing
wash
and
rinse
T able
Close the top lid.
Clean the foreign materi al
and push S T AR T /PAU S E button
Re-order the laundries.
Close the top lid.
L evel the machine in right position.
After about 10 seconds,it will
start .
" buttons, then push
PROCEDURE SELECT
indicators flash. Run
to
Hide quick links:
Advertisement
Table of Contents
