Download Print this page

Haier XQS80-828 User Manual

Double drive full automatic washing machine
Hide thumbs


Quick Links

This manual is for
Please read this manual
carefully before using.
Retain it for future reference.



  Related Manuals for Haier XQS80-828

  Summary of Contents for Haier XQS80-828

  • Page 1 This manual is for XQS80-828 Please read this manual carefully before using. Retain it for future reference.
  • Page 2: Table Of Contents

    CONTENTS Specification table Names of the parts Water level/Water Safety precautions quantity (about) Installation and adjustment Water Injection pressure Install the water inlet hose 0.03MPa 1.0MPa Preparation before washing Standard washing / 8.0kg/8.0kg spinning capacity Put in the laundries Usage of the detergent Close the top lid Use the operation button Finish washing...
  • Page 3: Names Of The Parts

    Names of the parts Packing list × ° Ï ä Ë µ Ã ÷ Top lid component Inner cover Detergent box Water absorption gasket Inside the document bag Control panel seat Screw cover Outer tub cover Water inlet valve Components of the water inlet Inner tub Balance ring hose...
  • Page 4: Safety Precautions

    Safety precautions Trouble-shooting answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns The washing machine must be positioned so that Please plug the power plug on special sometimes. Please confirm again before sending it to repair. Do not repair it by yourself. the plug is accessible.
  • Page 5 Disposal after washing Safety precautions After using, please clean the lint and foreign materials of the lint filter etc. in time. Do not put hand into the rotating tub. It is dangerous Otherwise it may influence your using the machine. Do not decompose, repair or alter the machine by even if the rotation speed is slow.
  • Page 6: Installation And Adjustment

    Installation and adjustment The washing machine has a Woollen program , intended for high-grade fabrics such as cashmere . First, make sure the laundry Please install and adjust the machine according to the requirement of the manual. can be washed with water or not. If not, do not use the washing machine to wash the laundry. If yes, select the washing cycle It is very important to your security and correct operating the machine.
  • Page 7 I DELAY button Adjust the Installation position "+ - " Push down the "+ - " select the reserve time(2h-24h), The largest allowable slope of the shank base of the machine is 2 .The slanting or rough ground will result in unstable running or stoppage of the machine.
  • Page 8: Install The Water Inlet Hose

    Install the water inlet hose Confirm the water faucet "WASH " button Water faucet,suitable Water faucet,not suitable Press the Wash button to select a wash procedure .Press SET "+ - " select the desired wash time, WASH from the MEMORY,BLANKET,CHILD,STANDARD program. Press SET "+ - "...
  • Page 9 5 Use the operation button Description of operation button Connection between the water inlet hose and the washer POWER DELAY ON/OFF MEMORY STANDARD 1.Do not take off the water absorption cushion. Please check if the FIRST RINSE Í ° ¸ É Ô ï nut of the water SECOND RINSE BLANKET...
  • Page 10: Preparation Before Washing

    2 Put in the laundries 1 Preparation before washing The capacity of washing of the machine refer to the largest weight of the Preparation before washing standard laundries under dry condition that can be washed in one time. Laundries quantity in one washing cycle shall be lower than 1.Connect the water inlet hose.