Jeep grand cherokee 2015 User Manual page 58

OPERATING YOUR VEHICLE
COMMANDVIEW® SUNROOF WITH POWER SHADE
The CommandView
console.
NOTE:
The CommandView
function exactly the same as the power
sunroof. Refer to "Opening Sunroof,
Venting Sunroof and Closing Sunroof" in
"Power Sunroof".
Opening Power Shade
Express
• Press the shade switch rearward and
release it within one-half second and
the shade will automatically open to
the halfway position and stop auto-
matically.
• Press the switch a second time from
the halfway position and the shade will
automatically open to the full open
position and stop automatically.
Manual
• To open the shade, press and hold the
switch rearward. The shade will open
and stop automatically at the half-open position.
• Press and hold the shade switch rearward again and the shade will open
automatically to the full-open position.
NOTE:
Any release of the switch will stop the movement and the shade will remain in a
partially opened condition until the switch is pushed and held rearward again.
Closing Power Shade
Express
• Press the switch forward and release it within one-half second and the shade will
close automatically from any position.
Manual
• To close the shade, press and hold the switch in the forward position.
NOTE:
Any release of the switch will stop the movement and the shade will remain in a
partially closed condition until the switch is pushed and held forward again.
56
sunroof with power shade switch is located on the overhead
®
sunroof switches
®
Commandview® Sunroof Switches
1 — Opening Sunroof
2 — Venting Sunroof
3 — Closing Sunroof
4 — Opening Shade
5 — Closing Shade