Jeep grand cherokee 2015 User Manual page 31

To program a Key Fob to the memory position:
1. Cycle the vehicles ignition to the OFF position.
2. Select the desired memory profile 1 or 2.
3. Press and release the S (SET) button on the memory switch, then within five
seconds press and release the 1 or 2 button accordingly.
4. Press and release the LOCK button on the RKE transmitter within 10 seconds.To
recall the saved positions, press 1 or 2 on the memory switch or press UNLOCK on
the programmed RKE transmitter.
Easy Entry/Exit Feature
The memory seat has an Easy Entry/Exit feature. This feature provides automatic
driver seat positioning to enhance driver mobility when entering and exiting the
vehicle.
NOTE:
The Easy Entry/Exit feature is not enabled when the vehicle is delivered from the
factory. To enable (or later disable) this feature you must select "Easy Exit Seats" in
"Engine Off Options" through the programmable features in the Uconnect
• Refer to "Uconnect
User Guide.
• For further details refer to "Uconnect
ment Panel" in the Owner's Manual on the DVD.
Manual Seat Adjustment
Forward/Rearward
• Lift up on the adjusting bar located at
the front of the seat near the floor and
release it when the seat is at the de-
sired position. Then, using body pres-
sure, move forward and backward on
the seat to be sure that the seat adjust-
ers have latched.
GETTING STARTED
Customer Programmable Features" in "Electronics" of this
®
®
Settings" in "Understanding Your Instru-
Adjusting Bar Location
system.
®
29