Jeep grand cherokee 2015 User Manual page 106

ELECTRONICS
Complete The Pairing Procedure
• When prompted on the phone, verify with radio password shown on the Uconnect
Screen.
• If your phone asks you to accept a connection request from Uconnect
"Yes." If available, check the box telling it not to ask again – that way your phone
will automatically connect each time you start the vehicle.
Select The Mobile Phone's Priority Level
• When the pairing process has successfully completed, the system will prompt you
to choose whether or not this is your favorite phone. Selecting "Yes" will make this
phone the highest priority. This phone will take precedence over other paired
phones within range. Only one phone can be paired at a time.
• You are now ready to make hands-free calls. Push the "Uconnect
on your steering wheel to begin.
Making A Phone Call
• Push the Uconnect
• After the BEEP, say "dial" then the number (or "call" then the name as listed in
your phone; see Phonebook).
NOTE:
You can also initiate a call by using the touchscreen on the Phone main screen.
Receiving A Call – Accept (And End)
• When an incoming call rings/is announced on Uconnect
button .
• To end a call, push the Hang Up or Phone button
Mute (Or Unmute) Microphone During Call
To mute the Uconnect
• Press the "Mute" button on the main Phone screen to mute and unmute the call.
Transfer Ongoing Call Between Handset And Vehicle
To transfer an on-going Uconnect
• Press the "Transfer" button on the main Phone screen to transfer an on-going call
between the handset and the vehicle.
Common Phone Commands (Examples)
• "Call John Smith"
• "Call John Smith mobile"
• "Dial 1 248 555 1212"
• "Redial"
104
Phone button
®
Phone microphone during a call:
®
phone call:
®
.
.
, select
®
Phone" button
®
, push the Phone
®
®