Jeep grand cherokee 2015 User Manual page 30

GETTING STARTED
Power Lumbar
• Push the switch forward to increase
the lumbar support. Push the switch
rearward to decrease the lumbar sup-
port.
• Pushing upward or downward on the
switch will raise and lower the position
of the support.
Memory Seat
The memory seat feature allows you to set two different driver seating positions
(excluding lumbar position), outside mirrors, radio station preset settings and
tilt/telescoping steering column position (if equipped). The memory seat buttons are
located on the driver's door panel.
To set a memory position:
1. Cycle the vehicles ignition to the ON
position.
2. Adjust all memory profile settings.
3. Press and release the S (SET) button.
4. Press and release the 1 or 2 button
within five seconds.
NOTE:
Before programming your RKE transmit-
ters you must select the "Personal Set-
tings Linked To Key Fob" feature through
the Uconnect
®
"Uconnect Settings " in "Understand-
®
ing Your Instrument Panel" in the Own-
er's Manual on the DVD for further details.
28
system. Refer
Power Lumbar Switch
to
Memory Seat Buttons