Srt Performance Features - Jeep grand cherokee 2015 User Manual

SRT
4. Press and release the "LAUNCH" Button.
5. Press the accelerator pedal to the floor.
NOTE:
If the cluster launch DID message indicates all conditions are correct for launch and
the throttle is pressed to the floor quickly (within approximately 1/2 second) the
system will hold the engine speed to a preset speed (below the engine rev limiter
speed).
6. Release the brake pedal.
Pressing the launch control button when launch control is active will deactivate
launch control.
NOTE:
• Launch Mode brings the engine to optimum RPM and waits for the driver to
release the brake. Launch Mode then uses engine throttle only to achieve
controlled wheelslip for maximum acceleration through first gear.
• Launch Mode can be initiated in any of the Select Trac Modes.
• Launch Mode is not available until the 500 mile (805 km) break-in has been
achieved.

SRT PERFORMANCE FEATURES

DID Performance Features
The DID can be used to program the following Performance Features.
• 0-60 mph (0-100 km/h)
• Peak G-Force
174
• Instantaneous G-Force
• 1/8 Mile
Performance Features Controls
• Braking Distance
• 1/4 Mile