Cleaning And Maintenance; Ecology - Environment Protection - Zelmer 39Z014 User Manual

Cleaning and maintenance

● Do not hold the adaptor with wet hands while plugging and unplugging form mains supply outlet.
● The adaptor and supplying cord should be always dry.
● It is forbidden to immerse the hair clipper in water or other liquids for cleaning, as the device is not waterproof. It can
damage the live parts (accumulators).
– Start the device pressing in ON/OFF button
– Always switch off the hair clipper and unplug the adaptor from the mains supply outlet before cleaning and maintenance.
– Remove the comb attachment from the hair clipper.
– In order to remove cutting head press the cutting head blade
frame.
– If necessary, rinse the plastic comb attachments under running water, and then dry them thoroughly.
– Remove the remains of hair from the cutting head
– Insert the protrusion of cutting head
– Press gently the cutting head
TIP: If you use your hair clipper regularly, it is necessary to oil the cutting head from time to time. In order to do it, use only
acidless oil, such as oil for sewing machine.
– Remove an attachment and cutting head from the hair clipper.
– Press the cutting blade in directions indicated by the arrows (see the big arrows on the photo) and insert one up to two oil
drops between the cutting blades.
– Replace the cutting head and start up the hair clipper for a while, in order to distribute the oil.
– Remove the exceeding oil with cloth.
Ecology – Environment protection
Each user can contribute to protect the environment. It is neither difficult nor expensive. In order to do so:
Return cardboard packages to recycling points.
Throw polyethylene (PE) bags into appropriate containers.
Batteries contain substances harmful to the natural environment. Do not throw them away with other household waste. Return used
batteries to recycling points. Before disposing of or returning the appliance to a recycling point make sure to remove the batteries from
the battery compartment.
Return a worn out appliance to an appropriate collecting point as the components of the appliance may pose a threat to the
environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product any time in order to adjust it to law regulations, norms, directives, or due to construction, trade,
aesthetic or other reasons, without notifying in advance.
(4).
(1) with attached cleaning brush (VII).
(1) back into the locking hole in the frame of cutting head.
(1) in, until you hear a clicking sound of locking.
(1) forward with your thumb, in order to release it from the
GW39-005