Outline And Parts Of The Hair Clipper; Handling And Operation Of Hair Clipper - Zelmer 39Z014 User Manual

Outline and parts of the hair clipper

Handling and operation of hair clipper

The hair clipper can be used both as a mains supplied or cordless device.
1. Operation with power supply adaptor
At first insert the adaptor plug into the device and then insert the adapter plug into the mains supply outlet (230 V). In mains supplied mode the device
is ready for use.
2. Loading accumulators and cordless operation
TIP: Load the device minimum 16h before first usage and when 2–3 next loadings.
– Make sure the appliance is switched off before charging.
– Place the device on the loading base
– Connect the loading base (II) to the adapter cord.
– Insert the adapter plug into appropriate mains supply outlet (230 V). Accumulators loading level indicator
demonstrates the loading process progress and current level of loading. Fully loaded accumulator enables operation
for approx. 50 minutes.
46
I. Hair clipper.
1. Cutting head.
2. Cutting length adjustment knob.
3. Indicator of accumulators loading level.
4. On/OFF switch.
5. Loading socket.
II. Loading base.
III. Hair thinning attachment.
IV. Attachment 4 – 6 mm.
V. Attachment 10 – 12 mm.
VI. Attachment 16 – 18 mm.
VII. Attachment 22 – 24 mm.
VIII. Attachment 28 – 30 mm.
The hair clipper accessories additionally comprise
cleaning brush and power supply adaptor.
(II).
(3)