Restore Your Outgoing Message To Default; Answer Settings; Set Answer Delay; Set Recording Time Of Incoming - Telstra V950a User Manual

1
Answering machine
Restore your outgoing message to
default
1. In standby mode, choose Menu and press
to select ANSWER MACHINE
Select.
2. Press to select TAM SETTINGS
Choose Select.
3. Press to select OGM SETTINGS
Choose Select.
4. Press to select ANSWER & RECORD
ANSWER ONLY . Choose Select.
DEFAULT
5. Press to select . Choose
Select.
6.Press OK to confirm restoring to default
OGM.
Answer and Record
The pre-set Answer and Record outgoing message,
which allows your caller to leave a message, is
"Hello, your call cannot be taken at the moment, so please
leave your message after the tone".
Your Answer and Record outgoing message can be
up to 1 minute long and will replace the pre-recorded

message.

42
Answer Only
The pre-set Answer Only outgoing message, where
callers hear an announcement but cannot leave a
message, is "Hello, your call cannot be taken at the
. Choose moment and you cannot leave a message, so please call
later".
When recording your Answer Only message, remember
. to advise your caller that they will not be able to leave
a message. Your own Answer Only message can be
up to 1 minute long and will replace the pre-recorded
.
message. To reinstate the pre-recorded messages,

restore your outgoing message to default.

When your answering machine memory is full and
or
the answer mode is in Answer & Record, the answer
mode will change to Answer Only automatically. It will
change back to Answer & Record mode automatically
after some messages have been deleted.

Answer Settings

1. In standby mode, choose Menu and press
to select ANSWER MACHINE
Select.
2. Press to select TAM SETTINGS
Choose Select.
3. Press to select ANSWER MODE
Select.
4. Press to select the outgoing
message type, ANSWER & RECORD
ONLY .
5. Choose Select to confirm.
Answering machine

Set Answer Delay

1. In standby mode, choose Menu and press
to select
Select.
2. Press to select
Choose Select.
3. Press to select
Choose Select.
4.Choose Select and press
the answer delay that you want. (2 Rings to
9 Rings or Time Saver).
5. Choose Select to confirm.

Set Recording Time of Incoming

Message
. Choose 1. In standby mode, choose Menu and press
to select
Select.
.
2. Press to select
Choose Select.
. Choose
3. Press to select
Choose Select.
or ANSWER 4.Choose Select and press
the recording time that you want. (60 Sec,
120 Sec, 180 Sec, or Unlimited).
5.Choose Select to confirm.
Answer and Record
You cannot delete a pre-recorded message. If you delete
your personal outgoing message the pre-recorded
ANSWER MACHINE . Choose
outgoing message will be automatically reinstated as
your outgoing message.
TAM SETTINGS .
Answer mode
Choose which outgoing message you want played to
ANSWER DELAY .
callers.
Answer delay
to select
Answer delay sets the number of times your Telstra
V950a will ring before the answering machine answers
your call and starts playing the outgoing message. You
can choose a Answer Delay setting from 2 to 9 rings or
Time Saver.
Time Saver
When you ring in to access your messages remotely, if
your answering machine is set to Time Saver and you
have new messages it will answer after 2 rings. If you
ANSWER MACHINE . Choose
do not have any new messages, it will answer after 4
rings. This means you can hang up knowing you have
no new messages, saving you time and the cost of the
TAM SETTINGS .
call.
RECORDING TIME .
Recording time
Set the maximum message length: 60, 120 or 180
seconds or unlimited.
to select
43