Gas Supply Requirements - KitchenAid 740-0781 Installation Instructions And Use & Care Manual

To ensure that the grill operates properly, it is recommended that the
■
island have ventilation on all 4 sides as shown in the following
illustration. The ventilation holes should be as diagramed to ensure
adequate ventilation for your grill and island.
2 2
20 in. (129.0 cm ) min.
ventilation both sides
1½" (3.0 cm) max.
2 2
10 in. (64.5 cm ) min.
ventilation both sides
Proper ventilation is a required based on the above mentioned
■
specifications for your grill to operate properly.
LP Gas
LP Gas Pressure Regulator/Hose Assembly Location
Measurements shown are for attaching the LP gas pressure regulator/
hose assembly to the enclosure.
8
Natural Gas Pressure Regulator Location
Measurements shown are for attaching the Natural gas pressure regulator
to the enclosure.
5" (12.7 cm) max.
2½" (6.0 cm) max.
Natural Gas Conversion

Gas Supply Requirements

Observe all governing codes and ordinances.
IMPORTANT: This installation must conform with all local codes and
ordinances. In the absence of local codes, installation must conform with
American National Standard, National Fuel Gas Code ANSI Z223.1 -
latest edition or CAN/CGA B149.1 - latest edition.
IMPORTANT: Grill must be connected to a regulated gas supply.