Mercury 135 Verado Manual page 50

6. Select button ‑ Selects the System View on‑screen options
and confirm data entries. Holding the select button for two
seconds will pause the slide show if selected in Favorites.
Holding the select button for three seconds will activate the
reset data function (except when in the slide show function).
Holding the select button for five seconds or more will bring
up the Home page.
7. Neutral LED ‑ The neutral LED illuminates when engine is in
neutral gear position. It also flashes when throttle only is
activated.
NOTE: Gear position is determined by sensing the position of the
shift actuator on the engine, not the position of the control handle.
8. Active LED ‑ The active LED illuminates to show the remote
control is active and ready for use.
FEATURES AND CONTROLS
42