Crankcase Oil Pump
4. Pump out the engine oil into an appropriate container.
DRAIN METHOD
1. Tilt outboard up to the trailer position.
2. Turn the outboard so that the drain hole is facing downward.
3. Remove the drain plug/seal and drain the engine oil into an
appropriate container.
4. Lubricate seal washer on the drain plug with oil and reinstall.
CHANGING OIL FILTER
IMPORTANT: To reduce or prevent oil spillage when removing the
oil filter ensure that the outboard is upright (not tilted) and the
engine is cold or has not run for at least one hour.
1. Remove the top cowl.
2. Place a rag or towel below the oil filter to absorb any spilled
oil.
MAINTENANCE
11591
125
91‑90265A 5
Aids in the removal of engine oil
without draining the crankcase.
15613