Mercury 135 Verado Manual page 47

FEATURES AND CONTROLS
5. Stop/start button ‑ Allows the boat operator to start or stop the
engine without using the ignition key. The ignition key must be
in the "ON" position to start the engine.
6. Lanyard stop switch ‑ Turns the ignition off whenever the
operator (when attached to the lanyard) moves far enough
away from the operator's position to activate the switch.
7. Control handle tension adjustment screw ‑ This screw can be
adjusted to increase or decrease the tension on the control
handle (cover must be removed). This will help prevent
unwanted motion of the handle in rough water. Turn screw
clockwise to increase tension and counterclockwise to
decrease tension. Adjust to tension desired.
a
39
3414
22964