Mercury 135 Verado Manual page 111

AIR FILTER REMOVAL
1. Remove the FSM vent hose and the engine ventilation hose
from the flywheel cover.
2. Remove the bolts securing the flywheel cover to the rear
mounting posts.
a - Flywheel cover bolts
b - FSM vent hose
3. Lift the flywheel cover off the front mounting post and the
intake resonator.
4. Remove three screws holding the upper flywheel cover to the
lower flywheel cover.
5. Separate the two flywheel cover sub‑assemblies to access the
air filter.
MAINTENANCE
a
103
c - Engine ventilation hose
b
c
15247
14309