3. Place a block of wood between gearcase and propeller to hold
propeller and remove propeller nut.
4. Pull propeller straight off shaft. If propeller is seized to the shaft
and cannot be removed, have the propeller removed by an
authorized dealer.
5. To aid in future removal of the propeller, liberally coat the
propeller shaft splines with one of the following Mercury/
Quicksilver products:
Tube Ref No.
Anti-Corrosion
94
Grease
2-4-C Marine
95
Lubricant with Teflon
6. Flo‑Torq II Drive Hub Propellers ‑ Install forward thrust hub,
replaceable drive sleeve, propeller, thrust hub, propeller nut
retainer and propeller nut onto the shaft.
a -
Propeller nut
b -
Propeller nut retainer
c -
Thrust hub
MAINTENANCE
Description
a b
c
29592
Where Used
Propeller shaft
splines
Propeller shaft
splines
e
d
d -
Propeller
e -
Replaceable drive
sleeve
f -
Forward thrust hub
111
Part No.
92-802867Q
92-802859A1
f
26941
1