Siemens REV17 Series Instructions Manual page 2

Function
Type summary
Ordering
Delivery
Mechanical design
Display and operating
elements
2 / 13
Siemens
Building Technologies
• PID control with self-learning or selectable switching cycle time
• 2-point control
• 7-day time switch
• Remote control
• Preselected 24-hour operating modes
• Override function
• Holiday mode
• Party mode
• Frost protection mode
• Information level to check settings
• Reset function
• Sensor calibration
• Minimum limitation of setpoint
• Periodic pump run
Protection against valve seizure
• Synchronization to radio time signal from Frankfurt, Germany (REV17DC)
Room temperature controller with 7-day (weekday/weekend) time switch
Room temperature controller with 7-day (weekday/weekend) time switch and
receiver for time signal from Frankfurt, Germany (DCF77)
Please indicate the type number as per the "Type summary" when ordering.
The controller is supplied with batteries.
Plastic casing with an easy-to-read display and large numbers, easily accessible
operating elements, and removable base.
The housing contains the controller's electronics, DIP switches, and the relay with
potential-free changeover contact. The easily accessible battery compartment allows for
easy exchange of two 1.5 V alkaline batteries, type AA.
The base with terminal block provides lots of space to connect the wires.
Room temperature controller REV17..
REV17
REV17DC
CE1N2203en
24.04.2008