F E At U R E S - O P E R At I O N S; Battery Replacement; Power On/Off; Remote Control - Bionaire BCH9222-CN Instruction Leaflet

F E AT U R E S - O P E R AT I O N S

heater. Line up holes of the base with holes on
bottom of pedestal (or heater housing if no
pedestal is included), and secure with 4 provided
screws. Refer to Figure 4.
Step 3: Lace the power cord through the cord minders on
the underside of the base. Refer to Figure 5.
Step 4: Turn the heater right side up on a flat level
surface prior to beginning operation.

Remote Control

Your heater comes with a remote control, unpack the remote
control from box. This includes one lithium battery,
CR2025/3V. Please note this remote control will not work
through walls. Remove battery before discarding the remote.
NOTE: REMOVE THE PROTECTIVE COVER FROM THE BATTERY
PRIOR TO BEGINNING OPERATION.

Battery Replacement

1. Locate the battery compartment on the back of the
remote control handset. Insert a small object (such as
a pin or paper clip) into the hole of the battery cover
lock (see Figure 6) and slide out the battery cover.
2. Remove old battery.
3. Place new battery into battery compartment.
4. Slide battery compartment into the remote control
handset until the Battery Cover Lock is securely
latched.
5. For your convenience, a remote control holder is
integrated into the back of the heater housing.
Figure 6
B
A. Battery Cover Lock
B. Battery cover
A
Insert pin here
NOTES:
• THIS PRODUCT CONTAINS A BUTTON BATTERY. IF
SWALLOWED, IT COULD CAUSE SEVERE INJURY IN JUST 2
HOURS. SEEK MEDICAL ATTENTION IMMEDIATELY.
• Remove the battery from the equipment when it is not
being used for an extended period of time.
• Remove the used battery promptly.
• Do not discard used batteries into household trash
containers. Contact your local government for disposal or
recycling practices in your area.
This Class B digital apparatus complies with Canadian
ICES-003.

OPERATING INSTRUCTIONS

1. Place heater on a firm, level surface.
2. Plug heater into a standard outlet. Once plugged in, the
Power icon ( ) will illuminate on the Touchscreen.
NOTE: Avoid overloading your circuit by not using other
high wattage appliances in the same outlet. At 1500
watts, this unit draws 12.5 Amps.
3. Operate heater by pressing the Power Button ( ) and
selecting modes and settings according to preference.
NOTE: Remove the plastic film from the control panel
before using (if included).
NOTE: All can be operated by a finger touch onto the
corresponding icons on the Touchscreen or operate by
pressing the buttons on the remote control.
NOTE: Do not press the icons on the screen hard, instead
press softer and longer to activate the desired function.

Power On/Off

Press the Power Red icon ( ) to turn the heater on. Once on, all
heat mode icons will illuminate on the control panel. Press the
Power icon to manually turn off the heater at any setting.
NOTE: The Red Power icon ( ) will remain illuminated
while unit is plugged in.
Set Current Clock Time (For first use only)
Once plugged in, the clock time "12:00 AM" will begin to
blink on the LCD Display, set the current clock time by using
the Hr., Min., and arrow icons.