Table of Contents
Advertisement
F E AT U R E S - O P E R AT I O N S
SAVE THESE
INSTRUCTIONS
TECHNICAL SPECIFICATIONS
• Amps: 12.5
• Wattage: 1500W (+5% -10%)
• Working Voltage: 120V AC/60 Hz
REMOTE CONTROL
Your heater comes with a remote control, unpack the
remote control from box. This unit requires 2 AAA
batteries, 1.5V (not included). Please note this remote
control will not work through walls. Remove battery
before discarding the remote.
Battery Replacement
a) Remove battery cover from remote control.
b) Remove old batteries from the remote control.
c) Insert two new batteries, pressing them firmly into
their slot.
d) Replace the battery cover.
NOTES:
• Replace all batteries of a set at the same time.
• Being careful not to bend or damage the contact
spring, clean the battery contacts and devices'
contacts prior to installing the batteries.
• Remove the batteries from the equipment when it is
not being used for an extended period of time.
• Remove the used batteries promptly.
• Do not mix old and new batteries. Do not mix
alkaline, standard (carbon-zinc), or rechargeable
batteries.
• Do not discard used batteries into household trash
containers. Contact your local government for
disposal or recycling practices in your area.
This Class B digital apparatus complies with Canadian
ICES-003.
OPERATING INSTRUCTIONS
1. Carefully remove your heater from the box. Please
save the carton for off-season storage.
2. Place heater on a firm, level surface.
3. Plug heater into a standard outlet. Once plugged in,
the Power Light will illuminate.
NOTE: Avoid overloading your circuit by not using other
high wattage appliances in the same outlet. At 1500
watts, this unit draws 12.5 Amps.
Power Button (
Press the Power Button (
remote control to turn the heater on. Once on, the heater
will run in the High Heat setting at 29°C, and the High
Heat icon (
Power Button (
any setting.
MODE
NOTE: The Power Light will remain illuminated while unit
is plugged in.
Mode Control
Press the Mode Button on the control panel or remote
control to select your desired heat settings. Each press of
the button will cycle through the below settings and the
selected icon will appear on the LCD.
The heater will run continuously at 1500W.
- LOW Heat
MODE
MODE
MODE
The heater will run continuously at 1000W.
- Heat & $ave
The heater will now cycle between high (at 1500W) and
MODE
low (at 1000W) heat settings to provide heat.
The heater will run at fan-only operation without heat
output.
)
) on the control panel or
MODE
) will appear on the LCD Display. Press the
MODE
) to manually turn off the heater at
MODE
- HIGH Heat
TM
- Fan Only
MODE
MODE
Advertisement
Table of Contents
