Yowza Delray Assembly Instructions And Owner's Manual page 47

COMPUTER OPERATION
P2 - INTERVAL INCLINE
After completing the user information set up, if you select the P2- INTERVAL INCLINE program, then press the ENTER button ,the
LCD will show the following:
SPEED show 2.0MPH, CALORIES and INCLINE show 0. PULSE LCD display show"P". The TIME display shows factory setting
24:00 and the blinking workout load level shows 1. Press the SPEED UP/DOWN buttons to adjust the workout load level from 1 to 9
then press the ENTER button to confirm the setting.
Then the blinking TIME LCD displays 24:00. Press the SPEED UP/DOWN buttons to adjust the total workout time and press the
ENTER button to confirm the setting.
Press the START button to start the workout. SPEED starts from 2.0MPH/3.2KPH. The TIME counts down from the set up workout
time. The CALORIES and DISTANCE count up from 0. INCLINE LEVEL follows the pre-set chart as follows
During the workout, press the SPEED UP/DOWN buttons to adjust the speed. Users can overwrite the incline level by pressing the
INCLINE UP/DOWN buttons.
COOL DOWN
After the pre-set TIME counts down to 0, treadmill will start a one minute cool down program. The TIME LCD will display COOL and
blink for 10 seconds and continue counting down 50 seconds at speed 2MPH/3.2KPH. After a one minute cool down, the treadmill
will stop and return to P2 start display. Press STOP to go to POWER ON status.
LEVEL MIN. LEVEL
1
2
3
4
5
6
7
8
9
http://www.yowzafitness.com/
MAX. LEVEL
0 4
1 5
2 6
3 7
4 8
5 9
6 10
7 11
8 12
47