Troubleshooting - Yowza Delray Assembly Instructions And Owner's Manual

34 YOWZA DELRAY TREADMILL

TROUBLESHOOTING

NOTE: Do not touch any internal electric wires without consulting the manufacturer.
Treadmill will not start:
Treadmill will not power up
Treadmill stops operation during use
Treadmill will not incline(Power fold models only)
Treadmill will not unfold
Treadmill running belt moves slower than speed
displayed on computer
Treadmill running belt moves slower than speed
displayed on computer
Running belt is not centered
Running belt is slipping or hesitating while in use
Treadmill running belt moves slower than speed
displayed on computer
Running belt is not centered
Running belt is slipping or hesitating while in use
Symptom Resolution
Check the following:
§ Make sure the power cord is plugged into a
surge protector, the surge protector is
plugged into a properly grounded outlet and
the surge protector is turned on (refer to the
Power Requirements section in this manual).
§ Equipment circuit breaker is in the reset
position
§ Equipment power switch is in the on position
§ Safety key is properly inserted into the
computer console
§ Wall outlet is properly functioning with correct
voltage (Have an electrician check for
inadequate voltage at the outlet refer to the
Power Requirements section in this manual)
§ House circuit breaker is reset and is the
proper size. (refer to the Power
Requirements section in this manual)
§ Safety key is properly inserted into the
computer console
§ Equipment circuit breaker is in the reset
position
House circuit breaker is reset, meets proper
§
requirements and if worn replaced by an
electrician. (refer to the Power Requirements
section in this manual)
Program time has expired
§
§ Check for proper positioning of spring knob for
folding(See procedure in owners manual)
Power Fold only
§ Check for proper positioning of spring knob
for folding(See procedure in owners manual)
Manual Fold only
§ Folding locking lever is depressed
§ Metric/English conversion (See owners manual
for Metric/English conversion process)
Metric/English conversion (See owners manual
§
for Metric/English conversion process)
§ Treadmill is properly leveled(See procedure
in owners manual)
§ Center running belt (See Centering
procedure in owners manual)
§ Tension running belt (See process in owners
manual)
§ Metric/English conversion (See owners manual
for Metric/English conversion process)
Treadmill is properly leveled(See procedure
§
in owners manual)
§ Center running belt (See Centering
procedure in owners manual)
§ Tension running belt (See process in owners
manual)