Alarm Action - Panasonic WV-SFV310A Operating Instructions Manual

14 Configure the settings related to advanced view [Advanced view]
Clicking on the outside of the outline adds a new outline.
Streams that are configured in cropping use the same cropping area as the [Cropping] display. Therefore,
if the cropping outline is changed, the cropping area of streams configured in cropping are changed
according to the settings of the cropping outline.
[Cropping]
Either one of JPEG(1), JPEG(2), JPEG(3), H.264(1), H.264(2), H.264(3), or H.264(4) images, or all H.264
images can be selected to be sent as cropping images.
The images capture size selected for JPEG(1)/JPEG(2)/JPEG(3)/H.264(1)/H.264(2)/H.264(3)/H.264(4) on the
[JPEG/H.264] tab is used for the cropping image capture size.
Off: cropping images are not transmitted.
H.264(1): H.264(1) is transmitted as cropping images.
H.264(2): H.264(2) is transmitted as cropping images.
H.264(3): H.264(3) is transmitted as cropping images.
H.264(4): H.264(4) is transmitted as cropping images.
H.264(all): H.264(1), H.264(2), H.264(3), and H.264(4) are transmitted as cropping images.
JPEG(1): JPEG(1) is transmitted as cropping images.
JPEG(2): JPEG(2) is transmitted as cropping images.
JPEG(3): JPEG(3) is transmitted as cropping images.
•
Default: Off
Note
•
Changing the cropping settings temporarily stops transmission.
•
When "Off" is selected for "H.264 transmission", cropping settings are not available for H.264(1), H.
264(2), H.264(3), and H.264(4).
•
When the maximum image capture size is selected for H.264(1), H.264(2) or JPEG(1), cropping
settings are not available.
•
When the maximum image capture size is selected for H.264(1), H.264(2), H.264(3), H.264(4) or
JPEG(1), cropping settings are not available.
SPW312L
[Area]
When selecting a cropping area in the screen, it will be numbered as area 1.
[Status]
Select "On" or "Off" to determine whether or not to use the cropping area.
On: The cropping area will be set.
Off: The cropping area will not be set.
Default: Off
[Delete] button
Click the [Delete] button corresponding to the area to be deleted. The outline of the selected area will be
deleted.

[Alarm action]

Determine whether to transfer cropping images when an alarm occurs. Transferring cropping images is
available only when a setting other than "H.264(all)" is selected for "Cropping".
On/Off
Default: Off
[Home area]
Configure the area for cropping transmission when an alarm occurs.
1/2/3/4
Default: 1
138 Operating Instructions
SPN531 SPW531L SPW532L
SFx311 SFx310 SPN311 SPN310 SPW311L