Configure The Multi-Screen Settings [Multi-Screen] - Panasonic WV-SFV310A Operating Instructions Manual

12 Configure the multi-screen settings [Multi-screen]

12 Configure the multi-screen settings
[Multi-screen]
The cameras from which images are to be displayed on a multi-screen can be registered on the
"Multi-screen" page. (®page 42, page 44)
[IP address]
Enter the IP address or the host name of the camera to be used for the multi-screen. 4 cameras can be
registered as a group and up to 4 groups (16 cameras) can be registered.
When the HTTP port number for the camera of which images are to be displayed had been changed, enter as
follows:
Example of entry:
–
Example when entering an IPv4 address: http://192.168.0.10:8080
–
Example when entering an IPv6 address: http://[2001:db8:0:0:0:0:0:1]:8080
To access the cameras using the HTTPS protocol, enter as follows:
Example of entry: https://192.168.0.10/
•
Available number of characters: 1 - 128 characters
•
Default: (Cam. 1) selfcamera, (Cam. 2 - 16) not registered
IMPORTANT
•
When accessing the camera using the HTTPS protocol, install the security certificate of the camera to
display images on the monitor. (®page 171)
114 Operating Instructions
WV-SPN531A