Panasonic WV-SFV310A Operating Instructions Manual page 60

10 Configure the basic settings of the camera [Basic]
•
Schedule: Saves images in accordance with the settings for "Schedule" (®page 184). Available only for
the "H.264(1)", "H.264(2)", "H.264(3)", or "H.264(4)" images.
•
Default:
–
Recording stream 1: FTP error
–
Recording stream 2: Alarm input
Note
•
When "H.264(1)", "H.264(2)", "H.264(3)", or "H.264(4)" is selected for "Recording format", "FTP
error" is unavailable.
•
When "JPEG(1)", "JPEG(2)", or "JPEG(3)" is selected for "Recording format", "Schedule" is
unavailable.
JPEG recording(Manual)
This setting is only available when "JPEG(1)", "JPEG(2)", or "JPEG(3)" is selected for "Recording format", and
"Manual" is selected for "Save trigger".
[File name]
Enter the file name used for the image to be saved on the SD memory card. The file name will be as follows.
•
File name: ["Entered file name" + "Time and date (year/ month/ day/ hour/ minute/ second)"] + "Serial
number"
•
Available number of characters: 1 - 8 characters
•
Unavailable characters: " & * / : ; < > ? \ |
[Image saving interval]
When "Manual" is selected for "Save trigger", select an interval (frame rate) of saving images on the SD memory
card from the following.
0.1fps/0.2fps/0.33fps/0.5fps/1fps
•
Default: 1fps
JPEG recording(Alarm)
This setting is only available when "JPEG(1)", "JPEG(2)", or "JPEG(3)" is selected for "Recording format", and
"Alarm input" is selected for "Save trigger".
[File name]
Enter the file name used for the image to be saved on the SD memory card. The file name will be as follows.
•
File name: ["Entered file name" + "Time and date (year/ month/ day/ hour/ minute/ second)"] + "Serial
number"
60 Operating Instructions