Panasonic WV-SFV310A Operating Instructions Manual page 92

11 Configure the settings relating to images and audio [Image/Audio]
[AGC]
Select a method of gain adjustment from the following.
•
On(High)/ On(Mid)/ On(Low): When the luminance of the subject becomes darker, gain will be
automatically increased and screen will become brighter. "High", "Mid" and "Low" are indications of gain
level.
•
Off: Images will be captured with the fixed gain level.
•
Default: On(High)
[Maximum shutter]
The maximum shutter time adjusts the storage time of the sensor. The following are available for the recording
duration.
Max.1/1000s, Max.1/500s, Max.1/250s, Max.1/120s, Max.2/120s, Max.1/100s, Max.2/100s, Max.1/60s, Max.
1/30s, Max.2/30s, Max.4/30s, Max.6/30s, Max.10/30s, Max.16/30s
•
Default: Max.1/30s
IMPORTANT
•
When a value with an interval longer than "Max.1/30s" (Max.2/30s/ Max.4/30s/ Max.6/30s/ Max.
10/30s/ Max.16/30s) is selected for "Maximum shutter", the frame rate may become lower. Noise or
white dots (blemishes) may sometimes appear.
Note
•
"Max.1/60s" is available only when "2 mega pixel [16:9](60fps mode)" or "1.3 mega pixel [16:9](60fps
mode)" is selected for "Image capture mode".
•
When "2 mega pixel [16:9](60fps mode)" or "1.3 mega pixel [16:9](60fps mode)" is selected for "Image
capture mode", "Max.2/100s" will become unavailable.
•
"Max.1/120s" and "Max.2/120s" are available only when "Indoor scene (60 Hz)" is selected for "Light
control mode".
•
When "Max.16/30s" is selected, for example, sensitivity will automatically be increased up to x16.
•
When "Fix shutter" is selected for "Light control mode", this setting is unavailable.
•
When "Off" is selected for "AGC", values with an interval longer than "Max. 1/30s" (Max.2/30s/ Max.
4/30s/ Max.6/30s/ Max.10/30s/ Max.16/30s) will become unavailable.
When "2 mega pixel [16:9](60fps mode)" or "1.3 mega pixel [16:9](60fps mode)" is selected for "Image
capture mode", "Max. 1/30s" will also become unavailable.
•
The available values change depending on the light control mode settings.
[Day & Night(IR)]
Select switching between the color mode and the black & white mode from the following.
•
Off: The color mode is selected.
•
On: The black & white mode is selected.
•
Auto1(Normal): The camera automatically switches between the color mode and the black & white mode
in accordance with picture brightness (luminance). The black & white mode will automatically be selected
when the lighting condition becomes darker, while the color mode will automatically be selected when it
becomes brighter.
•
Auto2(IR Light): Suitable when using near-infrared light source at night.
•
Auto3(Super Chrome Compensation(SCC)): Suitable to keep the color mode even under darker light
condition. The color mode will be carried on by the Super Chrome Compensation (SCC) function even
under illumination that is lower than Auto1(Normal).
•
Default: Auto1(Normal)
•
Default: Auto2(IR Light)
Super Chrome Compensation (SCC) function
This function achieves faithful color images using the proprietary color compensation technology that
reproduce images even under low illumination where it is usually difficult to capture objects faithfully.
92 Operating Instructions
SFx311 SPN311 SPW311L
SFx311 SPN311
SPW311L SPW312L
SPW312L SPN531 SPW531L
SPN531
SPW531L SPW532L
SPW532L