Setting Pauses; Switching Temporarily To Tone Dialling (Dtmf) - Siemens Gigaset A580 IP Manual

Operating the base station on the PABX
If an access code is set, the following applies:
u
The access code is added automatically when dialling from the calls list and
when dialling emergency numbers and SMS centre numbers.
u
When dialling numbers manually and dialling numbers from the directory you
must add the access code yourself.

Setting pauses

Changing the pause after line seizure
You can set the length of the pause inserted between pressing the talk key c and
sending the phone number.
M 4 O L
§Menu§
~
Changing the pause after the recall key
You can change the length of the pause if your PABX requires this (refer to the user
guide for your PABX).
M 4 O
§Menu§
~

Switching temporarily to tone dialling (DTMF)

If your PABX still operates with dial pulsing (DP), but you need tone dialling for a
connection (e.g. to listen to the network mailbox for your fixed line network con-
nection), you must switch to tone dialling for the call.
Precondition: You are currently conducting an external call via the fixed line net-
work or you have dialled an external fixed line network number or an external call
is signalled.
§Menu§
Tone dialling
Tone dialling is now activated for this call only.
106
Enter a number for the length of the pause (1 = 1 sec.; 2 = 3 sec.;
3 = 7 sec.) and press
Enter a number for the length of the pause (1 = 1 sec.; 2 = 2 sec.;
3 = 3 sec.; 4 = 6 sec.) and press
Open menu.
§OK§
Select and press .
§OK§
.
§OK§
.