Opening Lists With The Message Key - Siemens Gigaset A580 IP Manual

Hide thumbs Also See for Gigaset A580 IP:
Table of Contents

Advertisement

Opening lists with the message key

You can use the message key f to open the following list selection:
u
Calls list
u
SMS list,
u
Network mailbox,
A separate list is displayed for each network mailbox.
Precondition: Its number is saved in the base station, it is switched on
£
(
Page
assigned to the handset as a receive number.
An advisory tone sounds as soon as a new message arrives in a list. The f key
flashes (it goes off when the key is pressed). The message You have new messages
appears in the display in idle status.
List selection
The lists displayed after pressing the message key f depend on whether there
are any new messages.
f key does not flash (no new messages): All lists are displayed. Select a list with
q. To open, press
f key flashes (new messages received): All the lists that contain new messages
are displayed as well as the network mailbox lists, whose connection is assigned to
the handset as a receive number (Net AM Fixed Line, Net AM IP1,...).
Incoming SMS message list
All received SMS messages are saved in the incoming message list,
Network mailbox lists
If you select a network mailbox list and press
network mailbox. For information on the network mailbox,
Calls list
The calls list contains the last 20 numbers, depending on the type of list set
u
all calls
– answered calls
– unanswered calls
u
missed calls
– unanswered calls
In the list of missed calls, multiple calls from the same number will be stored once
(the latest call). The number of calls from this number is shown in brackets after the
entry.
In the list of answered calls, multiple calls from the same number are stored several
times.
£
Page 71
£
Page 78
140) and the corresponding VoIP/fixed line network number is
§OK§
.
§OK§
, you are connected directly to the
£
Page
Using lists
£
Page
71.
78.
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents