Siemens Gigaset A580 IP Manual page 164

Status Meaning
code
0x413 Message is too long.
0x414 URI is too long.
0x415 Query format is not supported.
0x416 URI is faulty.
0x420 Incorrect ending
0x421 Incorrect ending
0x423 The requested service is not supported by the VoIP provider.
0x480 The dialled number is temporarily unavailable.
0x481 The recipient is not available.
0x482 Double service query
0x483 Too many "jumps":
The query was rejected because the service server (proxy) has decided that this
query has already passed through too many service servers. The maximum
number is defined beforehand by the original sender of the query.
0x484 Wrong number:
In most cases this response means that you have simply omitted one or more dig-
its in the phone number.
0x485 The URI dialled is not unique and cannot be processed by the VoIP provider.
0x486 The called party is busy.
0x487 General faults:
The call was cancelled before a call was established. The status code confirms
receipt of the interruption signal.
0x488 The server cannot process the query because the data entered in the media
description is not compatible.
0x491 The server notifies that the query will be processed as soon as a previous query has
been completed.
0x493 The server rejects the query because the phone cannot decrypt the message. The
sender has used an encryption method that neither the server nor the receiver
phone can decrypt.
0x500 The proxy or the receiving device has discovered a fault while executing the query.
It is therefore impossible to execute the query. If this occurs, the caller or the
phone displays the fault and repeats the query after a few seconds. The number of
seconds after which the query can be repeated may be transmitted to the caller or
phone by the receiving device.
0x501 The query cannot be processed by the recipient because the recipient does not
have the functionality that the caller requires. If the recipient understands the
query but does not process it because the sender does not have the necessary
rights or the query is not permitted in the current context, status code 405 is trans-
mitted instead of 501.
0x502 In this case, the receiving device that transmits this error code is a proxy or a gate-
way and has received an invalid response from its gateway via which this query is
to be processed.
Service (Customer Care)
163