Siemens Gigaset A580 IP Manual page 23

First steps
No
"New firmware available" is shown in the display...
New/improved firmware is available for your phone on the Internet. First carry out
an automatic update of the firmware (
completed (after approx. 3 minutes) the handset's idle display appears again and
the message key f flashes. If you press f, the display shown in the picture
above appears and you can start the connection assistant.
Please note
To protect your phone and its system settings from unauthorised access, please
define a 4-digit number code (system PIN) known only to yourself. This code must
be entered before you can register/de-register handsets or alter your phone's VoIP
or LAN settings.
The default system PIN is 0000 (4 x zero). For how to change the PIN,
System PIN:
[ _ _ _ _ ]
Ç
Please note
u
You can also call up the connection assistant at any time via the menu
£
( Page
u
The connection assistant will also start automatically if you try to establish a
connection via the Internet before you have made the necessary settings.
Precondition: You have not activated the fixed line network connection as a
replacement connection (Web configurator,
22
Start VoIP
connection
wizard?
Yes
OK
100).
You will see the following display.
¤
Press the key under
screen.
You will be prompted to enter your phone's
system PIN.
£
Page 99). Once the update has been
The active line is marked [----].
¤
Enter your phone's current system PIN
using the keypad.
¤
Press the key below
screen.
The connection assistant is started.
£
Page
§Yes§
on the display
£
Page
§OK§
on the display
133):
96.