Fastener Depth Control Adjustment; Removing Nails, Directional Exhaust - Bostitch F21PL Operation And Maintenance Manual

When using the framing contact arm:
The Fastener Depth Control Adjustment feature provides control of the nail drive depth from flush with or just
above the work surface to shallow or deep countersink.
TO ADJUST THE FASTENER DEPTH CONTROL:
Disconnect tool from air supply before attempting any parts disassembly and before
changing the work contacting element adjustment.
1. Push in on locking button.
2. Adjust contact arm up to increase depth
of drive or down to decrease it.
3. Release locking button
Note: Metal Connector Attachment
is not adjustable for depth control.
The adjustable exhaust deflector can be rotated into any desired position by hand without the use of any tools.
1. Pull pusher back until it engages latch.
2. Slide nails back to opening and push out.

FASTENER DEPTH CONTROL ADJUSTMENT

2. ADJUST
DIRECTIONAL EXHAUST DEFLECTOR
Exhaust Deflector
PULL BACK ON PAWL
TO RELEASE NAIL STICK
LOCKING BUTTON
CONTACT ARM
REMOVING NAILS
VIEW 3 PAGE 7
7
1. PUSH IN
3. RELEASE