Fastener Depth Control Adjustment - Bostitch N88RH-2MCN Operation And Maintenance Manual

When using the framing contact arm:
The Fastener Depth Control Adjustment feature provides control of the nail drive depth from
flush with or just above the work surface to shallow or deep countersink.
TO ADJUST THE FASTENER DEPTH CONTROL:
DISCONNECT TOOL FROM AIR SUPPLY BEFORE ATTEMPTING
ANY PARTS DISASSEMBLY AND BEFORE CHANGING THE WORK
CONTACTING ELEMENT ADJUSTMENT.
1. Push in on locking button.
2. Adjust contact arm up to increase
depth of drive or down to decrease it.
3. Release locking button
Note: Metal Connector
Attachment is not adjustable
for depth control.
N88RH-2MCN
1. Pull pusher back until it engages latch.
2. Slide nails back to opening and push out.
FASTENER DEPTH CONTROL ADJUSTMENT - N88RH-2MCN
ADJUST
Exhaust Deflector
LOCKING BUTTON
CONTACT ARM
DIRECTIONAL EXHAUST DEFLECTOR
The adjustable exhaust deflector can be
rotated into any desired position by hand
without the use of any tools.
7
PUSH IN
RELEASE
REMOVING NAILS
2
1